Visit other Fluke companies for calibration equipment and services in electrical, power, pressure, flow, RF, and more.
Fluke
DH Instruments
|
|
Meet our faculty |
 |
Mingjian Zhao came to us in 1994 from the National Institute of Metrology
(NIM, China) where he worked as a researcher for seven years. He has published
over 40 papers worldwide and has an MS degree in Thermal Physics from Harbin
Institute of Technology (P. R. China). He is currently Hart’s director
of primary standards engineering and an expert in the design of thermometers
and fixed points. |
| |
|
 |
Tom Wiandt, Hart’s director of metrology, has been with us since 1995.
He has been key in achieving and maintaining our NVLAP accreditation in
American Fork, Utah and UKAS accreditation in Norwich, England. His knowledge
in temperature metrology is backed by his experience at Northrop Corporation,
Southern California Edison, and the US Air Force. He is a frequent speaker
at MSC, NCSLI, and international metrology organizations. He is currently
the ASTM chair for committee E20.07, Fundamentals in Thermometry. |
| |
|
 |
Mike Hirst, one of the original founders of Hart Scientific, has worked
in the engineering of high-performance temperature sources since 1970,
including dry-well calibrators, fixed-point furnaces, and baths. He received
his BS degree in design technology from Brigham Young University. |
| |
|
 |
Rick Walker has been with us since 1988 and has had a leading role in the
development of a majority of Hart’s thermometer readouts, including the Tweener, Black Stack, and Super-Thermometer. He holds an MS degree in electrical
engineering. |
| |
|
 |
Frank Liebmann has been with us since 2003. He is an expert in infrared
temperature measurement and works as an engineer in the design of IR thermometer
calibrators and other temperature calibration equipment. Frank has a BS
in Electrical Engineering from the University of Utah. Since 2008, he has be chair of ASTM Subcommittee E20.02 on Radiation Thermometry. |
| |
|
 |
Ron Ainsworth, marketing manager for Hart Scientific, was formerly the
calibration laboratory manager and has been with the company since 1999.
He holds a BS in Physics from Brigham Young University and has published
his research through TEMPMEKO, the American Institute of Physics, and NCSLI,
where he is also a section coordinator. |
|
Phone: 801-763-1600
