Phone: 801-763-1600
Fax: 801-763-1010
Phone (toll free): 800-438-4278
E-mail: info@hartscientific.com
 

Search

Advanced Search Button

Request a....
Catalog request button
Consultation Request button
Quote request button

Home

What's New

Products

Support

U.S. Cal Lab

European Cal Lab

Accreditation

Training

Events

Publications

Contact Hart

International

Links

Temperature Calculators

Site Contents

Visit other Fluke companies for calibration equipment and services in electrical, power, pressure, flow, RF, and more.

Link to Fluke Calibration for electrical and power calibration

Fluke

 

Link to DH Instruments for pressure and flow calibration

DH Instruments

  

Precision Industrial RTDs – Model 5627A

5627s

Features

  • Vibration and shock resistant
  • 19 mm (3/4-inch) bend radius for increased durability
  • NVLAP-accredited calibration included, lab code 200706-0

Specifications 

Resistance  Nominal 100W 
Temperature Coefficient  0.00385 W/W/ °C nominal 
Temperature Range  –200 °C to 420 °C
(5627A-6 and 5627A-9 to 300 °C; transition and cable temperature: 0 °C to 150 °C) 
Drift Rate (k=2)  ± 0.04 °C at 0 °C after 100 hours at 420 °C 
Sheath Material  316 Stainless Steel 
Leads  Teflon™-insulated, nickel-plated stranded copper, 22 AWG 
Termination  Specify. See Ordering Information. 
Time Constant  Four seconds maximum for 63.2 % response to step change in water moving at 3 fps. 
Bending Radius  Sheath may be ordered with a bend on a minimum radius of 19 mm (3/4 in) except for 50 mm (2 in) area of sheath near tip. (Hart lab requires 20 cm [8 in] of unbent sheath to re-calibrate.) 
Calibration  Includes manufacturer’s NVLAP-accredited (lab code 200706-0) calibration and table with R vs. T values in 1 °C increments from –196 °C to 500 °C (to 300 °C for 5627A-6 and 5627A-9).
ITS-90 coefficients included. 
Immersion  At least 100 mm (4 in) recommended 
Calibrated Accuracy† (k=2)  ± 0.026 °C at –196 °C
± 0.046 °C at 0 °C  
± 0.077 °C at 200 °C  
± 0.124 °C at 420 °C  
Size  5627A-12: 305 mm x 6.35 mm (12 in x 1/4 in)
5627A-9:  229 mm x 4.7 mm (9 in x 3/16 in)
5627A-6: 152 mm x 4.7 mm (6 in x 3/16 in) 
†Includes calibration uncertainty and 100 hr drift. 

When buying a PRT, performance isn’t the only criterion you need to look at. The real issues are price-to-accuracy and price-to-durability ratios. 

5627A probes have a temperature range up to 420 °C and an accuracy as good as ± 0.025 °C. They come in three different lengths. (Both six- and nine-inch models cover –200 °C to 300 °C.) Each instrument is shipped with its ITS-90 coefficients and a calibration table in 1 °C increments. 

One of the best features of this sensor is that it conforms to the standard 385 curve, letting you use your DIN/IEC RTD meters fully. Why use a probe that’s less accurate than your meter? 

The 5627A is manufactured using a coil suspension element design for increased shock and vibration resistance. It has a mineral-insulated sheath with a minimum bend radius of 19 mm (3/4-inch) for flexibility and durability. (Bend, if any, should be specified at time of order.) 

Six- and nine-inch 5627As are calibrated at –196 °C, –38 °C, 0 °C, 200 °C, and 300 °C. For 12-inch versions the point at 300 °C is replaced by a calibration point at 420 °C. 

Each probe is individually calibrated and includes a NVLAP-accredited report of calibration from the manufacturer, lab code 200706-0. 

This probe is an excellent value. It has the price-to-accuracy and price-to-durability ratios you should demand in every  PRT you buy! 

Ordering Information 

5627A-6-X  Secondary PRT, 152 mm x 4.7 mm (6 x 3/16 in), –200 °C to 300 °C 
5627A-9-X  Secondary PRT, 229 mm x 4.7 mm (9 x 3/16 in), –200 °C to 300 °C 
5627A-12-X  Secondary PRT, 305 mm x 6.35 mm (12 x 1/4 in), –200 °C to 420 °C 
2601  Probe Carrying Case 
X = termination. Specify “A” (INFO-CON for 914X), “B” (bare wire), “D” (5-pin DIN for Tweener Thermometers), “G” (gold pins), “I” (INFO-CON for 1521 or 1522), “J” (banana plugs), “L” (mini spade lugs), “M” (mini banana plugs), “P” (INFO-CON for 1523 or 1524), or “S” (spade lugs).

Downloads

Right click one of the following links and “Save Target As ...” to download the catalog pages/data sheet or a product User's Guide in Acrobat (.pdf)  format.

Catalog page(s)/data sheet
5627A PRT User's Guide

Use our feedback form for more information.

 

 

  
Send mail to webmaster@hartscientific.com with questions or comments about this web site.
Copyright © 1998-2009 Fluke Corporation